CDA RC 9621 Series Manual For Installation, Use And Maintenance

31, 31 Removing the Oven Door The oven door can easily be removed as follows: – Open the door to the full extent (Fig. 29a). – Open the lever “A” completely on the left and right hinges (Fig. 29b). – Hold the door as shown in Fig. 29. – Gently close the door (g. 24c) until left and right…

22, CDA RC 9621 Series 22 Cooking Advice Sterilization Sterilization of foods to be conserved, in full and hermetically sealed jars, is done in the following way: a. Set the switch to position . b. Set the thermostat knob to position 185 °C and preheat the oven. c. Fill the dripping pan with hot …

35, 35 ANTI-TILT BRACKET Important! To restrain the appliance and prevent it tipping accidentally, t a bracket to its rear to x it securely to the wall. To t the anti-tilt bracket: 1. After you have located where the cooker is to be positioned, mark on the wall the place where the two …

38, 38 Appliance Servicing CDA provide a quality and eective after-sales service to cover all your servicing needs. Please attach your receipt to this page for safekeeping. Please help us to help you by having the following information available when booking a service-call: 1. Model ty…

2, 2 Important This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment. The appliance guarantee will be void if the appliance is use…

10, 10 Electronic Clock (g. 4) The programmer is equipped with an electronic clock with illuminated numbers which indicates hours and minutes. Upon immediate connection of the oven or after a power cut, three zeros will ash on the programmer display. To set the correct time of …