CES GPS-207 Operation & User’s Manual

2, REGULATORY COMPLIANCE FCC The GPRS modem was tested and certified to meet FCC Parts 15 in a stand-alone configuration, which demonstrated that it complies with Part 15 emission limits. The GPS-207 uses an Enfora manufactured GPRS modem. FCC Part 22 & Part 24 is covered by the "modular …

13, Figure 8: Battery position Next, plug the battery connector into the mating connector on the circuit board. The GPS-207 can now be closed. Replace the top cover, snap it into place and tighten the screws. 3.3 Choose a location The GPS-207 should be mounted outdoors, ensuring that the top of the…

14, Figure 9: GPS-207 Screw Holes (GPS-207 shown) Once the center points of the mounting screw holes have been marked drill the holes using the appropriate size drill bit. 3.5 External Power Cable (GPS-207DC Only) The connections for the external power cable are: Power (7-18Vdc) Blue Ground White …

17, 6.0 Support If you need help, we are easily accessible …. Telephone: Call 407-679-9440, and ask for product support. Fax: 407-679-8110 Email: [email protected] Skype: Please email [email protected] to obtain your currently assigned support engineer’s Skype address. Product su…

4, WARRANTY Complete Warranty details can be found at the CES Wireless web site: www.ceswireless.com CES Wireless Technologies Corp., (CES Wireless), warrants this product to be free from defects in material and workmanship for 12 months from date of shipment. If such malfunction occurs…

15, CES GPS-207 4.0 Battery Replacement When the battery needs to be replaced in the GPS-207 follow these steps to remove it. Section 3.2 details the steps required to insert the new battery. First, remove the GPS-207 from its installed location and open it by loosening the 4 screws. Remove the top. D…