CFM BLACKSTONE 1000 Owner's Manual

6, tion (DOT) or the National Standard of Canada, CAN/CSA-8339, Cylinders , Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as ap- plicable; and shall be provided with a listed overfilling prevention device. Read labels on the LP Gas Sup…

14, Assembly Step 4. Attach Side Tables to the Grill Bottom. a 3/B" open end wrench a7116" open end wrench qj (9.. q, eb 1. 2. Insert 3/4" bolts through holes in the support arms of the side tables, as shown. Slide a gasket washer over the threaded end of t…

17, ? 3. 4. Hold the lid to align the hinge holes. Insefi a hinge pin through the hinge hole in the lid and into the hole in the bottom hinge strut. After the hinge pin is in place, insert a hair pin through the hole of the hinge pin to secure it. HINT There is an …

22, CFM BLACKSTONE 1000 Assembly Step 8. Completing the Assembly I I I i 1. Place the heat shield inside the pillar above the cylinder. 2. Place an aluminum pan into the opening in the heat shield to catch grease drippings during use. NATURAL GAS MODELS i, t; '| it no tools needed heat…

25, MATCH LIGHTING IMPORTANT! The match lighting hote is found under the front right corner of the grill bottom. When match lighting the grill, use the gas control knob on your RIGHT-HAND side (closest to the match lighting hole). STEP 5. To match light: push do…

3, Teem oF CoNTENTS F\ CxnprcR Orue - INSTALLATION CHOOSING A SAFE LOCATION Cxeprgn Two - PORTABLE GAS GRILL BASICS FUEL FUEL SUPPLY SYSTEM FUEL REGULATORAND HOSE FUEL CYLINDER SPECIFICATIONS TRANSPORTING A FULL CYLINDER TAKE THESE INSTRUCTIONS TO THE L.P. GAS DEALER …