Data: UPD 1st October 2023
CHIEF SSB-104 Racks & Stands PDF Installation Instructions (Updated: Sunday 1st of October 2023 06:06:04 PM)
Rating: 4.4 (rated by 40 users)
Compatible devices: SLB-9000, Kontour KRA235, CMS440, FSB4090, FCASCA, RMF, LWM2X1UP, FHB3047.
Recommended Documentation:
Text Version of CHIEF SSB-104 Racks & Stands Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 01 October 2023)
INSTALLATION INSTRUCTIONS
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8850-000094 RevB
©2009 Milestone AV Technologies,
a Duchossois Group Company
05/09
SSB-104, SSM-104, SLB-104 and SLM-104 Interface Brackets
SSB-104, SSM-104, SLB-104 and SLM-104 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific
installation instructions provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
Installation Instructions
WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing Interface bracket.
NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place 5/8" spacers over threaded inserts in bottom of projector.
4. Place interface bracket onto projector, aligning spacers and mounting holes.
5. Using the M4 x 25mm Phillips pan head screws, M4 x 25mm Phillips flat head screws and flat washers, secure interface bracket to
projector. Tighten all fasteners at this time.
NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation
instructions in the All-Points Security Kit.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
(1) Interface Bracket (2) Screw, Phillips Pan Head, Machine, M4 x 25mm ****
(4) 10-24 Thumb Nuts ** (2) Washer, Flat, M4
(1) All-Points Security Kit (2) Screw, Phillips Flat Head, M4 x 25mm ****
(4) 1/2" x .257" x 5/8" Nylon Spacer ****
**Only used when installing SLB/SSB interface brackets. ****Used when mounting surface of projector is recessed.
NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the
encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style
interface bracket installation.
SLB-104
SLM-104
Towards front of
projector
Towards front of
projector
(Note:
SSM-style
interfa
ce bra
cket
conne
ction
s
a
r
e
e
n
c
i
r
c
l
e
d
)
(
Note
: SSB-
style
interfa
ce br
acket c
onne
ctions
a
r
e
e
n
c
i
r
c
l
e
d
)
Recommended:
KV-27FV15, H2O MOP X5, USB3-GIGA, 6202-WA-DFNT-DFCM3
NEOMOUNTS NM-D775DXSILVER, TXK-1701, CANTILEVER UMBRELLA BASE PLATE, Select NM-D775DXSILVER, MoCOW
-
SAS-100-CACross armNylock nutFlat washerFlat washerEnd capEyeboltCross arm1/2 Flat washer1/2 x 7” Long hex bolt1/2’ Nylock nut1/2 Flat washerCotter pinNylon friction washerREV00-073020151 of 2Installation GuideGridLink™ Cross Arm KitStep 1: For Use with Cable Kit For use with the Adju ...
Model & Doc Type: SAS-100-CA 2
-
M8105-9101A *M8105-9101A*Philips IntelliVue MP5 Patient Monitor Quick Guide Note: Some functions described may be available as SmartKeys directly on the main screen.All functions can also be accessed with the Main Setup key.Turning the monitor ON:Locate the On/Off switch in the lower left ...
Model & Doc Type: IntelliVue MP5 2
-
====================================================================== Control Commands for NEC Projector (Basic) Rev 3.0.30f Copyright (C) NEC Viewtechnology, Ltd. 2002-2006 ---------------------------------------------------------------------- Updated on November 09, 2007 ------ ...
Model & Doc Type: VT695 39
-
1 of 4 Workrite Ergonomics | 800.959.9675 www.workriteergo.comK Monitor Screws, Medium Qty: 4L Monitor Screws, Short Qty: 4H M2.5 Allen wrench Qty: 1 I M4 Allen wrench Qty: 1 J M5 Allen wrench Qty: 1F Conform Sit-Stand Articulating Arm Qty: 1G Pivot Cover Cap Qty: 1A 14" Pole wi ...
Model & Doc Type: Conform Sit-to-Stand Arm 4
Operating Impressions, Questions and Answers:
