Manual, Installation Instructions for CHIEF Flat Panel Wall Plate Accessory FSA-1001 Accessory (1 pages)
Data: UPD 12th March 2024
CHIEF Flat Panel Wall Plate Accessory FSA-1001 Accessory PDF Installation Instructions (Updated: Tuesday 12th of March 2024 05:51:54 PM)
Rating: 4.2 (rated by 29 users)
Compatible devices: Flat Panel Display Accessory Arm FSA-1003, i6550, Keyboard Tray Accessory KSA1021, CIE-Group, MC35, DGP32, CM4S57, M40 - MULTEOS - 40" LCD TV.
Recommended Documentation:
Text Version of CHIEF Flat Panel Wall Plate Accessory FSA-1001 Accessory Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 12 March 2024)
8804-000137 Rev. C 04/11/05
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]
INSTALLATION INSTRUCTIONS
FSA-1001 and KSA-1001
FLAT PANEL WALL PLATE ACCESSORY
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
(1) Wall Bracket (1) Wall Plate Casting (1) 5/16-18 x .75” Set Screw
(1) 5/32” Hex Key (2) Phillips Head #10 x 2-1/2” Wood Screws (2) #10 Washers
(1) 3/16” Hex Key
FLAT PANEL DISPLAYS ARE EXTREMELY FRAGILE.
1. Using the 3/16” hex key provided, remove the button head cap screw securing the monitor interface to the arm or
other modular flat panel arm component (i.e. desk clamp) (see Figure 2).
2. Using the wall bracket as a template, drill two 3/32” pilot holes to a minimum depth of 1-1/2”.
3. Using two Phillips head #10 x 2-1/2” wood screws and two #10 washers, secure the wall bracket (Insure level).
4. Install components at pivot in order (see Figure 2 and Figure 3).
5. Using the 3/16” hex key provided, tighten the button head cap screw until the desired amount of pivoting friction
is achieved.
6. Install the KSA/FSA on the wall bracket by placing the top of the KSA/FSA over the top of the wall bracket and
pushing the bottom of the KSA/FSA over the bottom of the wall bracket
7. Using the 5/32 hex key provided, secure the KSA/FSA to the wall bracket by tightening the setscrew.
8. Refer to FWD manual.
Figure 1
Figure 2
CAUTION!
Figure 3
Wall Bracke
t
Recommended:
917.388600, WMQ137AM, Propane 2Burner Drop-in Cooker, AeroGarden Bounty
NC100RD, RT-OS LP, L 2015, MHS125, 19xC, ThinkPad X131e
-
JABRA® IS A REGISTERED TRADEMARK OF GN NETCOM A/SWWW.JABRA.COMV02_1201HEADSET ACCESSORIES FOR JABRA PRO™ 900 SERIESPOWER SUPPLYAUS/NZ: ITEM# 14193-00EMEA: ITEM# 14163-00UK: ITEM# 14173-00NA: ITEM# 14183-00JABRA SINGLE UNIT HEADSET CHARGERAUS/NZ: ITEM# 14209-03EMEA: ITEM# 14209-01U ...
Model & Doc Type: PRO 920 1
-
Technical DataFluke 113Basic MultimeterFeatures include:• VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage and continuity• True-rms for accurate ac measurements on non-linear loads• A large backlit display allows for easy visibility in low-lit areas• ...
Model & Doc Type: 113 2
-
Technical DataEast West East WestEAN40 44155 05792 8 40 44155 05793 5 40 44155 05790 4 40 44155 05791 1UPC6 15104 19023 8 6 15104 19024 5 6 15104 19017 7 6 15104 19022 1Article number504684 504685 504682 504683Transducer principleClosed, Dynamic Open, DynamicFrequency response25-20,000 ...
Model & Doc Type: HD 65 TV 4
-
INSTRUCTION MANUALGUIDE D’UTILISATIONMANUAL DE INSTRUCCIONESINSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286(JUN12) Part ...
Model & Doc Type: DW083 6
Operating Impressions, Questions and Answers:
