Cortelco C60 Operation & User’s Manual

47, 47 Registration Failure Retry Time Registration failure retry time – If registration fails, the phone will attempt to register again after registration failure retry time. This will affect all lines 8.3.3.2 IAX2 Field Name Explanation Status Shows registration…

56, 56 Ring from Headset If this is enabled and a headset is connected, ring tone will be played in the headset. Enable Intercom Mute If enabled, mutes incoming calls during an intercom call Enable Intercom Barge If enabled, the phone will auto-answer an intercom call during an outs…

18, 18 *2* is the code. After saving the above configuration, A can dial *2* plus the number for B or C to join B and C’s call. The prefix can be set to anything the user desires that does not interfere with other dialing rules. 4.3 Redial / Unredial If B is on a call when A…

78, 78 Network Address Translation (NAT) Table Shows the NAT TCP and UDP mapping tables NAT Table Option Transfer Type Select the TCP or UDP protocol. Inside IP Set the local IP address of device. Inside Port Set the LAN (inside) port for NAT mapping Outside Port Set the WA…

32, Cortelco C60 32 8.3.1.2.4 Quick SIP Settings Field Name Explanation Display Name The name shown in caller ID. Server Address SIP server address either IP address or URI. Server Port SIP server port (usually 5060). Authentication User Login name or Authentication ID. …

39, 39 8.3.2.4 Service Port Set the port values for Telnet/HTTP/RTP on this page. Field Name Explanation Web Server Type Specify Web Server Type – HTTP or HTTPS HTTP Port Port for web browser access. Default value is 80. To enhance security, change this from the default. S…