Clifford Matrix 2.5X Owner's Manual

15, Clifford Matrix 2.5X 12 © 2004 directed electronics, inc. Alarm Page If the alarm system is triggered while armed, an Alarm Page will be sent to the remote control. After receipt of an Alarm Page, the LCD icons will display the alarm system status information and the remote control will generate Alarm Pa…

11, 8 © 2004 directed electronics, inc. and Buttons An optional auxiliary convenience or expansion function that you have added to your system can be activated by pressing these buttons simultaneously. The auxiliary output controls __________________________. standard icon configurations Ico…

29, 26 © 2004 directed electronics, inc. table of zones The zone number is the number of LED flashes used by the system to identify that input. The standard input assignments are listed below, along with spaces to write in any optional sensors or switches you have had installed. interpreting zone…

10, 7 © 2004 directed electronics, inc. rreemmoottee ccoonnttrrooll ffuunnccttiioonnss The remote control buttons are used to send commands to the system. The descriptions below reflect the standard configura- tion for this system. The buttons can be custom configured for the user’s specific…

25, 22 © 2004 directed electronics, inc. valet mode You can prevent your security system from automatically arming and triggering by using Valet Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the security system will not arm, even with the remote…

40, 37 © 2004 directed electronics, inc. If the system has entered the triggered sequence (siren has begun chirping), pressing the disarm button of the transmitter will not disarm VRS ® . To disarm the VRS ® during a VRS ® trigger sequence: 1. Turn the ignition on. 2. Press the Valet switch th…