Clifford Responder LE 3.3X Installation Manual

65, © 2008 Directed Electronics—all rights reserved 65 Menu 3 - Remote start features Menu Item Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5 1 Transmission Mode Manual Automatic 2 Engine Checking Mode Virtual Tach Voltage Off Tachometer 3 Cranking Time 0.6 sec 0.8 sec 1.0 sec 1.2 sec 1.4 (5)/1…

68, © 2008 Directed Electronics—all rights reserved 68 1-9 COMFORT CLOSURE OFF(1): The system can be programmed to close the windows when the system is armed. If programmed ON, the lock output provides a 20 second pulse when the system is locked. The output will be cancelled if the unlo…

30, Clifford Responder LE 3.3X © 2008 Directed Electronics—all rights reserved 30 Auxiliary harness (H2) H2/1 LIGHT GREEN/BLACK (-) Factory alarm Disarm This wire sends a negative pulse every time the remote start is activated , chan- nel 2 is activated (programmable on/off) or when the doors are unlocked with the remote.…

22, © 2008 Directed Electronics—all rights reserved 22 Door lock harness, 3-pin connector 1 BLUE (+) LOCK (-) UNLOCK OUTPUT 2 EMPTY NOT USED 3 GREEN (-) LOCK (+) UNLOCK OUTPUT There are three harness connections relative to remote start function, including the heavy gauge and input and output h…

33, © 2008 Directed Electronics—all rights reserved 33 (+)WAIT-TO-START WIRE H2/8 BROWN/BLACK (-) Horn honk output This wire is a low current output (200mA) and can be hooked to the horn honk wire in the vehicle. It can be programmed to sound only during full trigger or to be used like a siren…

17, © 2008 Directed Electronics—all rights reserved 17 Wait-to-start bulb wire for diesels Note: The system has a programmable onboard timer (See Menu#3 Feature 9), so it is not necessary to connect the wait-to-start wire. In diesel vehicles you can interface with the wire tha…