Clifford RSIII Owner's Manual

23, 20 © 2002 directed electronics, inc. triggered response description A Triggered Response can be activated by any of the triggers listed below and consists of an alarm page along with the response described for each trigger. The default Triggered Response dura- tion is 30 seconds but can be…

18, 15 © 2002 directed electronics, inc. programmable remote control features To enter programming mode Press and hold all four remote control buttons simultaneously until one long beep is heard. Programming Mode has now been entered. Page Notification The remote control can be programmed to noti…

51, 48 © 2002 directed electronics, inc. response while harder impacts will generate a full-trigger response. Remote Control: A hand-held device that operates the various functions of your system and communicates system status. Triggered Sequence: This is what happens when the alarm “…

26, Clifford RSIII 23 © 2002 directed electronics, inc. ➤ Press a fourth time within five seconds: The siren chirps four times followed by a long chirp. Zones 2 and 4 are now bypassed. ➤ Press a fifth time within five seconds: The siren chirps five times followed by a long chirp. All input zones, e…

44, 41 © 2002 directed electronics, inc. rraappiidd rreessuummee llooggiicc This Directed system will store its current state to non-volatile memory. If power is lost and then reconnected the system will recall the stored state from memory. This means if the unit is in Valet ® Mode …

6, 3 © 2002 directed electronics, inc. ssttaannddaarrdd rreemmoottee ccoonnffiigguurraattiioonnss 1 Auxiliary Channel Out 2 Receive Indicator 3 Signal Indicator 4 Transmit Indicator 5 Lock Status Indicator 6 Unlock Status Indicator 7 Arming Status Indicator 8 Disarming Status Indicator…