Clifford Sabre II Owner's Manual

9, UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your Sabre II system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of…

6, Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Sabre II. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems. Buying Clifford has always meant buying the be…

15, Feature Factory setting # of momentary presses Secondary action Program completion confirmation Result Add a new remote to channel 3 (silent arm/disarm) — 13 Press remote control button 3 3 chirps Button 3/channel 3 code of the new remote control has been memorized Erase all channels — 15 —…

8, Selectable starter/ignition interrupt At the time of installation, you can select whether your Sabre II interrupts the starter line or the ignition line. To verify which line is electronically interrupted, enter the vehicle, close the doors, arm the system while inside the vehicle, then try …

5, Standard Features of the Sabre II (cont.) ✔ Patented Remote Control Code Learning — A few flicks of a switch lets you match to the system up to 4 different 3-channel and/or ACG 12-channel remote controls. Just as easily, a lost or stolen remote control can be deleted from the system m…

10, Clifford Sabre II To enable valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Enter your secret valet code on the PlainView switch (the LED will turn on), then return the switch to its center position. 3. You now have 10 seconds to press the latched position to enter valet …