Cobra Digital 7750 PLT Operating Hints Manual

15, 4.3) Navigating to a city This lets you navigate to a city without entering a specific address. The 7750 PLT will choose an arbitrary address. NOTE: In some rare occasions the 7750 PLT might choose an arbitrary address that is unreachable due to truck restrictions. If you keep gettin…

23, 4.10) Adding an intermediate destination Maybe you need to pick up a load before traveling to a final destination. You can program the pickup point as an intermediate stop. Or maybe you are traveling to your home terminal, but you want to stop off at Joe’s Smokey Links for some…

50, 9.1) STAA National Network In 1982, the U.S. Congress passed the Surface Transportation Assistance Act, which allows large trucks to operate on the Interstate highways and certain primary routes. This road system is called the “National Network”. When driving on t…

21, 4.8) How to do a detour Note: This can only be performed if you have already programmed a destination. STEP 1 – Tap on the “star” icon in the lower-right STEP 2 – Tap on “Detour” STEP 3 – Choose a particular road to avoid, or choose a range (i.e…

34, Cobra Digital 7750 PLT 6.3) Saving the Mileage Log To save the Mileage Log, you need to plug a blank SD card into the slot on the side of your unit. The Mileage Log will be saved to the SD card. Any brand of SD card should be fine. The Mileage Log takes very little space, so even the smallest SD card tha…

35, 6.4) Backing up the Mileage Log To save a backup copy of the Mileage Log, you need to plug a blank SD card into the slot on the side of your unit. The Mileage Log will be saved to the SD card. Any brand of SD card should be fine. The Mileage Log takes very little space,…