ConnectPRO Master-IT SUN SR-14 Operation & User’s Manual

10, ConnectPRO Master-IT SUN SR-14 Master-IT SUN Once the side brackets are fastened to the Master-IT SUN, and the switch is mounted to the front of the rack, the cable support bar can be assembled and mounted to the vertical rails of the rack behind the switch. (Figure 6.) Figure 6. Cable Support Bar Assembly …

8, Master-IT SUN Figure 4. Computer Connections Multi-Media Module Connection The Master-IT SUN can facilitate the optional MAV-108 Multi- Media module through it’s Mini-DIN-8 link port. The MAV-108 allows the user to perform audio tasks from either the currently selected computer, or from a …

9, Master-IT SUN To initiate Auto Scan for the SR-14 from the front panel buttons, simultaneously press and release buttons #3 & #4. To initiate Auto Scan for the SR-18 from the front panel buttons, simultaneously press and release buttons #7 & #8. To initiate Auto Scan for the SR-28 …

1, Master-IT SUN Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT OR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE PRODUCT EXCEED THE PRICE PAID FOR THE PRODU…

7, Master-IT SUN In a cascade configuration, any port on the MASTER can be used to cascade to the CONSOLE ports of the SLAVE. For example: To select a computer which is connected to port #5 on the SLAVE, when port # 1 of the MASTER is used as the daisy-chain port, press and release the left CTRL key…

5, Master-IT SUN Audio Stick An optional multimedia module (Part # MAV-108) can be connected to the Master-IT SUN for selecting microphone and stereo speaker signals. Audio Stick is either ON or OFF. When set to ON, audio selection will follow computer selection. When set to OFF, audio…