Continental Scientific Refrigerators and Freezers Instruction Manual

26, PROBLEM PROBABLE CAUSE CORRECTION Condensing unit will not start - no hum. 1.LINE DISCONNECTED, SWITCH OPEN. 2.FUSE REMOVED OR BLOWN. 3.OVERLOAD PROTECTOR BLOWN. 4.CONTROL "OFF" DUE TO COLD LOCATION. 5.CONTROL STUCK IN OPEN POSITION. 6.WIRING IMPROPER OR LOOSE. 1…

1, Operation, Installation and Instruction Manual for Reach-In Refrigerators and Freezers Continental Scientific A Division of National Refrigeration & Air Conditioning Products, Inc. 539 Dunksferry Road · Bensalem, PA 19020-5908 215-…

18, cabinet temperature. On low-temperature freezers, place a screwdriver into the right thermostat adjustment screw ( do not turn the left differential adjustment screw) and turn clockwise for a colder cabinet temperature or counterclockwise for a warmer cabinet temperature. Further…

11, Continental Scientific Refrigerators and Freezers FIGURE 5 DOOR ADJUSTMENT AND REMOVAL REMOVAL OF GRILL To remove the grill, loosen all four (4) grill mounting screws located on the backside of the grill one or two turns. Simply lift grill up off of its mounting screws and out. To replace the grill, line up the g…

14, condensing unit, and electrical hook-up should be performed by qualified refrigeration personnel of a competent refrigeration company only. OPERATION All cabinets must be given sufficient time to reach normal operating temperature before placing any product …