Craftmade BW321AG3 Installation Manual

10, page 9 Warranty. Troubleshooting. Problem: Fan fails to operate. Solutions: 1. Check power to wall switch/wall control. 2. Check to be sure code switches in remote control transmitter and wall control are set properly. 3. Verify that receiver is wired properly. 4. Verify that wall control is wired…

4, 4. Hanging Bracket Installation. page 3 ON OFF ON OFF 3. Installation Preparation. hanging bracket 10 feet (3.05m) (76cm) 30 inches blade edge Turn off circuit breakers to current fixture from breaker panel and be sure operating light switch is turned to the OFF position. WARNING: Failure to…

2, SAFETY TIPS. page 1 WARNING: To reduce the risk of electrical shock, turn off the electricity to the fan at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. 1. READ ALL INSTRUCTIONS AND SAFETY INFORMATION …

7, page 6 6. Wiring. (cont.) IN ORDER TO WIRE WALL CONTROL, remove existing wall switch. Wire the WALL CONTROL with wire connectors provided as shown in diagram at right. * Wrap each wire connector separately with electrical tape as an extra safety measure. Gently push wires and t…

3, Craftmade BW321AG3 page 2 2. Parts Inventory. a. canopy. 1 piece b. hanging bracket. 1 piece c. 4½in. downrod and hanging ball. 1 piece d. remote control receiver. 1 piece e. wall control and plate. 2 separate pieces f. remote control transmitter. 1 piece g. canopy cover (in hardware pack or pre-a…