ZALMAN HD501 Operation & User’s Manual

18, 6 16 HD500 Series Optional Fan Installation Unfasten the Fixing Bolts and press the Hooks towards each other to pull the Side Panels off. Install the 2 X 120mm fans to the locations shown in the diagram. Intake Fan Exhaust Fan …

15, English 13 HD500 Series Align the HDD’s screw holes with the Hot Swap Trays Fixing Pins, then ‘close’ the Hot Swap Tray by pushing in the protruded section. Check that the Hot Swap Tray’s Fixing Pins and the HDD’s holes are properly aligned and fastened. Fully insert the HDD installed…

12, 10 HD500 Series Insert the SSD in the SSD Bracket and fasten with SSD Bolts. Reattach the HDD handle to the SSD Bracket. Push the SSD into the slot until there is a “Click” sound. Two SSD’s can be installed on a single Bracket. Installing HDD’s to the bottom rung can cause short circuit…

13, 2 English 11 HD500 Series If the case is frequently transported, please fasten the ODD Chassis (Top) and HDD Chassis (Bottom) before use. Tip (6) ODD/HDD Chassis Assembly 1) Push the ODD Chassis into its slot until there is a “Click” sound and fasten with Hand Screws. 2) Push the H…

3, ZALMAN HD501 1 English 1 HD500 Series (1) Please read this manual thoroughly prior to installation. (2) Before installing, check the components and condition of the product, and if any problem is found, contact the retailer. (3) Avoid inserting objects or hands into the system while it is in operation…