Zanussi Electrolux ZSF 6280 Manual, User Information

26, 26 Switching Off the dish- washer Switch off the dishwasher if the messages PRO- GRAMME END and PLEASE SWITCH OFF are being displayed alternately. With some dishwashing cycles, the drying fan con- tinues to run even after the end of the cycle. If the acoustic signal has been enabled…

28, 28 Cleaning the spray arm jets Regularly check the jets in the spray arms for blockages. When cleaning is necessary, re- move spray arm from the fixture and clean jets with a pointed object (wire or needle). Then rinse out the spray arm using a strong jet of water. 3 Do not damage the …

39, 39 Connecting the dishwasher Connecting to the water supply • The dishwasher can be connected to cold and hot water supplies up to max. 60°C. • The dishwasher must not be connected to open hot water appliances or instantaneous water heat- ers. Permitted water pressure Connecting the inl…

14, 14 Setting the Amount of Rinse Aid Required 3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dish- washing results are not satisfactory”.) The dosage can be s…

8, 8 Display The info status bar consists of a row of individual lamps that is divided into two sections: the left sec- tion refers to the Programmes menu, the right sec- tion to the Options menu. • In the Programmes and Options menus you can see at what stage within a cycle you currentl…