Datamax A-4310 Programmer's Manual

170, Appendix B – Sample Programs 154 Class Series Programmer’s Manual VB Application to Send RAW Data via a Windows Printer Driver This is a sample Visual Basic program that checks for any printer driver attached to “LPT1”. If one is installed then a DPL file can be printed via the pr…

111, Extended System-Level Command Functions Class Series Programmer’s Manual 95 STX Kn NIC Reset This command resets the NIC to factory defaults. Syntax: <STX>Knx Where: x - Specifies the action to take, where: F = Returns the NIC to the factory default settings; and, H = Report…

41, System-Level Command Functions Class Series Programmer’s Manual 25 STX q Clear Module This command clears the selected Flash or DRAM module. If a module is corrupted during normal operations (identifiable when the printer responds with a ‘No Modules Available’ message to a <STX>W c…

291, Appendix T – RFID Details Class Series Programmer’s Manual 275 WX / W1X: RFID with Byte Count Specifier (continued) Field Valid Inputs Meaning HF: Lock after write, where: x = 0 – Use printer setup to determine if lock is performed. x = 1 – Lock after write. yy = Not Used UHF EPC…

273, Datamax A-4310 Class Series Programmer’s Manual 257 Appendix Q International Language Print Capability (ILPC) Programming Examples ILPC, offered as a field upgrade or a factory installable option, allows the printing of non-English character sets, available with European language support (CG TIMES)…