Specifications:139/139845-740.pdf file (17 Mar 2024)
|
Yamaha HS840 Musical Instrument PDF Owner's Manual (Updated: Sunday 17th of March 2024 11:21:13 PM)
Rating: 4.8 (rated by 6 users)
Compatible devices: DD-35, Clavinova CLP-98, DG60-112, HS-500, PF-80, FE-30, PSS-790, PSS-21.
Recommended Documentation:
r Spring Tension Knob The Spring Tension Knob supplies tension control over a 11-step range, To increase tension, slide the Spring Tension Knob up (Fig. A) to any position you like (use the scale as a reference) and then rotate the knob to the left to lock in place. (Fig. B) To reduce tension, rotate the Spring Tension Knob to the right (Fig. C) and slide to any position you like. To increase tension, slide the Spring Tension Knob up, to decrease tension, slide the Spring Tension Knob down. t Footboard Stabilizer Rod The Footboard stabilizer rod should attach to holes in the frame at the bottom of the hi-hat base. y Spur The large heavy-duty rubber feet prevent unwanted movement of the hi-hat stand during playing conditions. To minimize slippage further, there are two spurs in the frame. These spurs can be extended as needed by adjusting the turn screws pro- vided on either side of the frame base. u Leg Position Adjustment Loosen Bolts A and B shown in the illustration to the right to change the position of the legs (footboard). After the position has been determined, tighten both Bolts A and B firmly. Also, we recommend that the legs be positioned in the same manner as shown in the illustration on the left so as to leave some space available for setup and to provide sufficient stability for the stand. (This setup is for right-handed drummers. For left-handed drummers, please set up in an opposite manner.) Note: To maintain smooth action, occasionally apply some grease-grade oil to all of the moving parts. Be careful not to use excessive force when tightening the extender base nut as this may damage the nylon bushing inside the tube. q Cymbal Support Plate To install the bottom hi-hat cymbal, remove the hi-hat clutch assembly and place the cymbal on the felt washer on the cymbal support plate. The angle of the bottom cymbal can be adjusted by turning the angle bolt on the underside of the support plate. To adjust the angle of the hi-hat cymbal, use the Knob Bolt located on the underside of the cymbal support. w Hi-Hat Clutch To install the top hi-hat cymbal, loosen the wing bolt and remove the entire hi- hat clutch assembly from the upper pull rod. Next, remove the clutch nut and position the cymbal between the two clutch felts. After installation, tighten the clutch nut on to the clutch assembly to secure the cymbal. Place the entire assembly onto the hi hat upper pull rod and tighten the wing bolt to secure the desired position of the top cymbal. The lock nuts on the top of the clutch can adjust the feel and sound of the hi hat cymbals. To obtain a loose sound, open the nuts off of the felt; for a tight sound, close the nuts onto the felt. Once the desired sound has been ob- tained, tighten firmly the lock nuts onto each other. e Position Clamp Once the bottom hi-hat cymbal height has been decided, the position clamp can be used to mark the settings for future set ups and to prevent uninten- tional changes during musical performances. Use a drum key to firmly tighten the position clamp into place. * Specifications and design are subject to change without notice. Introduction Thank you for purchasing a Yamaha Hi-Hat Stand. Please read this owner's manual thoroughly before use. HI-HAT STAND HS840/HS740 OWNER'S MANUAL CAUTION • To prevent the Hi-Hat Stand from coming loose during performance, tighten all securing bolts and adjustment bolts firmly. • To maintain smooth action, apply some grease-grade oil (ex. lithium grease) to all of the moving parts as needed. Hi-Hat Clutch Cymbal Support Plate Knob Bolt Position Clamp Extender Base Footboard Spur Footboard Stabilizer Rod Hi-Hat Shaft A B Spring Tension Knob ● Spring Tension Adjustment (Fig.A) (Fig.B) (Fig.C) Spring Tension Knob ● Cymbal Support Plate ● Hi-Hat Clutch Wing Bolt Lock Nut Felts Clutch Bolt Clutch Nut Knob Bolt Felt Fiber Cymbal Support Plate Printed in Indonesia Foot Board Leg Leg Leg * This product photograph is HS840.
#XT2DW9: IGS350BW0 User Guide
IGS350BW0, 52, ikea/igs350bw0.pdf
HoIP Telecom Guide: Pebbell (#2Q268F)
Pebbell, 13, hoip-telecom/pebbell.pdf
Tablet Reference Book #XO78GI
Qua tab 02, 2, huawei/qua-tab-02.pdf
Instruction (P-51B Mustang, #FFG775)
P-51B Mustang, 10, troy-built-models/p-51b-mustang.pdf
National Tutorial Microscope 460TBL-10 (#PVB75E)
460TBL-10, 6, national/460tbl-10.pdf
Sharp Guide: SD-HX600 (#NK4J6O)
SD-HX600, 78, sharp/sd-hx600.pdf
SS 3200 Lawn Mower - #58NY97
SS 3200, 48, toro/ss-3200.pdf
Nobilia Tutorial Indoor Furnishing LineN (#6B3Q75)
LineN, 64, nobilia/linen.pdf
#C23B74: Auto Immobilizer User Guide
Auto Immobilizer, 7, clifford/auto-immobilizer.pdf
Portable Generator 802 User Manual, #LS4T83
802, 20, quantum-data/802.pdf
Owner’s Manual■ Printing Conventions in This Manual• Text or numerals enclosed in square brackets [ ] indicate buttons.[WRITE] WRITE button[UTILITY] UTILITY button• Reference such as (p. **) indicate pages in this manual to whichyou can refer.* All product names mentioned in this ...
Model & Doc Type: GT-6B 84
HAMAMATSU, JAPANCopyright (c) Yamaha Corporation. All rights reserved. PDF-K338 ’05.08011781MIXING CONSOLESPECIFICATIONS (総合仕様)............................................... 3/5DIMENSIONS (寸法図)........................................................... 7P ...
Model & Doc Type: MG16/6FX 93
1 Contents What is the Voice Editor?............................ 2About Studio Manager................................. 3What is Total Recall .................................... 3About Open Plug-in Technology.................. 4Starting the Voice Editor ............................ 6Men ...
Model & Doc Type: MOTIF RACK ES 33
Thank you, and congratulations on your choice of the Roland Digital Piano RD-700. . Copyright © 2001 ROLAND CORPORATIONAll rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.Before using this unit, carefully read ...
Model & Doc Type: RD-700 11
# | Brand | Model | Document Type/File | Pages | File Size | Last Checked |
---|---|---|---|---|---|---|
1 | Yamaha | MOX8 |
74 | 4.79 Mb | 05/10 | |
2 | Elka | Concorde 119 |
36 | 22/10 | ||
3 | Yamaha | PSR-4600 |
30 | 4.11 Mb | 05/02 | |
4 | Yamaha | DTXPRESS IV |
63 | 21/10 | ||
5 | Yamaha | SY55 |
197 | 14/01 | ||
6 | Roland | HP-201 |
29 | 23/03 | ||
7 | Yamaha | PSS-590 |
42 | 3.65 Mb | 28/11 | |
8 | Yamaha | MU1000 |
192 | 2.9 Mb | 08/03 | |
9 | SONIC COUTURE | MORPHEUS |
17 | 25/11 | ||
10 | M-Audio | 49e |
13 | 19/02 |
# | Brand | Model | Document (PDF) | Pages | Size | Check Date |
---|---|---|---|---|---|---|
1 | NewLine | HD12 |
29 | 07.03.2024 | ||
2 | Moen | T188 Series |
4 | 09.02.2024 | ||
3 | Postek | Q8 |
39 | 19.01.2024 | ||
4 | Panasonic | CS-RE18MKR |
8 | 13.09.2023 | ||
5 | Philips | NORELCO PT734 |
14 | 09.01.2024 | ||
6 | Wood Stone | Bistro 3030 WS-BL-3030-RFG |
31 | 28.02.2024 | ||
7 | Hotpoint | HUI 62 TK |
36 | 29.01.2024 | ||
8 | Porsche | 911 GT3 Cup 2008 |
83 | 18.10.2023 | ||
9 | DUVLAN | Keaton Ergo DVL3013 |
32 | 13.11.2023 | ||
10 | Norac | UC4 Plus |
44 | 06.12.2023 |