Zenoah SGCZ2600DL Owner's Manual

1, GB-1 G B SGCZ2600DL/SGCZ2600DW SGCZ2600DL SGCZ2600DW G B OWNER’S MANUAL RECIPROCATORS 848JN393A1 (704) …

2, Zenoah SGCZ2600DL GB-2 SGCZ2600DL/SGCZ2600DW EXPLANATION OF SYMBOLS AND SAFETY WARNINGS SOUND LEVEL VIBRATION LEVEL ISO 10884 LwA measured guaranteed ISO 22867 A(8) MODEL LpA EN27917 a hv,eq SGCZ2600DL 25.4 cm 3 86 dB(A) 104.93 dB(A) 106 dB(A) 5.9 m/s 2 3.9 m/s 2 SGCZ2600DW 25.4 cm 3 86 dB(A) 104.93 dB(A) 106 dB(…

6, GB-6 SGCZ2600DL/SGCZ2600DW BEFORE STARTING THE ENGINE 1. The area within a perimeter of 15 m (50 ft) of the person using the product should be considered a hazardous area into which no one should enter. If necessary, yellow warning rope, warning signs should be placed around the perime…

13, GB-13 G B SGCZ2600DL/SGCZ2600DW 9. Maintenance BLADE Wipe off dust and dirt attached to the blades, and oil them after every use. To sharpen blade: 1. When the cutting edges have become dull, sharpen them by using a small disk grinder. (a) 2. When sharpening, offset the teeth of upper and lower blad…

10, GB-10 SGCZ2600DL/SGCZ2600DW IMPORTANT Avoid pulling the rope to its end or returning it by releas- ing the knob. Such actions can cause starter failures. 7. Move the choke lever downward to open the choke. And restart the engine. 8. Allow the engine to warm up for a several minutes…

8, GB-8 SGCZ2600DL/SGCZ2600DW WARNING Never use any screws other than those specified by the manufacturer, or the engine can get loose, result- ing in a hazardous event. IMPORTANT Tighten the screws gradually by turns. MOUNTING ENGINE 1. Install the engine to the drive shaft so that the cyli…