DEI 600HF Owner's Manual

6, 4 © 1990, 1996 Directed Electronics, Inc. to disarm the system with your transmitter if you inadvertently open the door while the system is armed, while still providing instant response (even if the door is immediately closed). • Turning on the ignition key will trigger the same progr…

4, 2 © 1990, 1996 Directed Electronics, Inc. Transmitter Buttons Channel I The arm/disarm and panic functions are usually controlled by Button I. Channel II The Silent Mode ™ , Remote Valet ® and optional trunk release functions are usually controlled by Button II. Silent Mode a…

8, DEI 600HF 6 © 1990, 1996 Directed Electronics, Inc. Valet ® Mode You can prevent your system from automatically arming and triggering by using Valet Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the system will not arm, even with the transmitter, b…

5, 3 © 1990, 1996 Directed Electronics, Inc. Using Your System Arming You can turn on, or arm, the system by pressing Button I of your transmitter for 1 second. When the system arms, you will hear a short siren sound, or chirp, and see the parking lights flash once. If the vehicle’…

3, 1 © 1990, 1996 Directed Electronics, Inc. What is Included ■ The control module ■ A pair of Four-button transmitters ■ A Stinger ® DoubleGuard ® dual-output shock sensor ■ A Revenger ® Soft Chirp ® six-tone programmable siren ■ A red Status LED indicator light ■ A push-button V…