Zon Legacy Elite Special4 Operation & User’s Manual

20, GUITARS GUITARS 3938 Note: The “CAL” switch position #1 is for the highest string. 3. Hold the bass in the approximate playing position, and with a .050" hex driver, rotate the optical adjustment hex screw (found on the top of the Monolith structure) clockwise, until the …

4, Zon Legacy Elite Special4 GUITARS GUITARS 76 bridge’s back edge (Fig. 3). Rotating this screw counterclockwise moves the saddle forward (toward the neck), causing the string pitch to raise (become sharp). Rotating the screw clockwise moves the saddle back- ward (toward the bridge), causing the string�…

19, GUITARS GUITARS 3736 Midrange control. 12dB boost or cut of midrange at a frequency selected by the mid sweep control. Turning the control clockwise boosts the mids. Turning the control counterclockwise cuts the mids. The detent, or “click,” in the center of the control is the…

7, GUITARS GUITARS 1312 ZP-2S MODEL: Hyperbass Description: Class A design with studio-grade compo- nents on a printed circuit board Function: Active master volume, bass, treble, and internal midrange boost/cut Specifications: Output level +16dBm, S/N ratio 100dB Power requirements: One …

8, the ZP-2DM, the midrange control is a knob on the instrument’s face. Turning the control clockwise boosts the mids. Turning the control counterclockwise cuts the mids. A detent, or “click,” in the center of the control is the “flat” posi- tion, zero boost or cut. Treble…

15, GUITARS GUITARS 2928 ZB-5 MODELS: VB4 & VB5 Description: Hand-assembled components housed in an electrostatically shielded, epoxy module Function: Master volume, pickup blend, bass, mid and treble boost/cut with push/pull selectable midrange frequency Specifications: Output level N/A Power r…