Yazoo/Kees ZELKH52250 Operator's Manual

55, TROUBLESHOOTING English-55 Problem Cause The engine will not start. • The blade switch is engaged. • The steering controls are not locked in the neutral position. • The driver is not sitting in the driver’s seat. • The parking brake is not activated. • The battery is dead. • …

16, English-16 SAFETY WARNING! Escaping hydraulic oil under pressure can have sufcient force to penetrate the skin, causing serious injury. If injured by escaping uid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immedia…

63, Yazoo/Kees ZELKH52250 English-63 TECHNICAL DATA Accessories Collection system Torque Specications Engine crankshaft bolt 50 ft/lb (67 Nm)• Deck pulley bolts 45 ft/lb (61 Nm)• Lug nuts 75 ft/lb (100 Nm)• Blade bolt 45-55 ft/lb (60-75 Nm)• Standard ¼" fasteners 9 ft/lb (12 Nm)• St…

58, English-58 SCHEMATICS 20 AMP ELECTRIC CLUTCH ACCESSORY OUTLET ENGINE GROUND WHT GRN WHT BLK RED/BLK RED/BLK YEL YEL BRN GRY BRN GRN GRN BRN YEL/RED BRN RIGHT MOTION CONTROL LEVER LEFT MOTION CONTROL LEVER BRAKE SWITCH SEAT SW. 1. SEAT UNOCCUPIED 2. BRAKE SWITCH IN OFF POSITION 3. MOTION CONTROL …

9, English-9 SAFETY Safety Instructions These instructions are for your safety. Read them carefully. IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH…

27, English-27 OPERATION Disengage the mower blades by pressing the blade switch downwards. Move the steering controls outward to the locked (outer) neutral position. Move the throttle to the middle position. 8061-023 Press the control for disengaging the mower deck 8061-023 Set the throttle 80…