Crown Boiler CHB68-112L Instructions For Installation And Connection Manual

1, Instructions for Installation and Connection of Oil Burner to Furnace For Furnace Models: CHB68-112L CHC68-96L CLBF68-112L CLBR68-112L : Failure to follow these instructions exactly may result in a fire or explosion causing property damage, personal inju…

2, Only qualified service personnel shall perform installation and service. 2 c cc c CAUTION: • ONLY a qualified oil-heating contractor shall install and adjust this oil burner, using calibrated combustion test instruments, to ensure safe and reliable operation of the furnace.…

3, Only qualified service personnel shall perform installation and service. 3 1) Remove the oil burner from the shipping carton and remove any shipping materials adhering to the burner. Collect and save the burner mounting gasket and any instructions furnished with the burner. …

4, Only qualified service personnel shall perform installation and service. 4 Figure 1: Side View of Correct Burner Insertion into Combustion Chamber 6) Reinstall the burner mounting plate, if removed, and push the burner flange gasket (included with the burner)…

5, Crown Boiler CHB68-112L Only qualified service personnel shall perform installation and service. 5 8) The burner and wiring harness are equipped with mating, three (3) pole, quick- connect, electrical couplings. To make the connection between the burner wiring harness and the furnace wiring harness, …

6, Only qualified service personnel shall perform installation and service. 6 NOTICE: On the horizontal / counterflow furnace wiring harness, remove the lock-ring from the end of the flexible metal conduit connector BEFORE connecting the electrical couplings. 10) On the highboy and…