X-Micro XWL-11GPAG Operation & User’s Manual

13, domain and 1 to 14 for Japanese domain. Tx Rate: Select the data rate for data transmission. Power Mode: There are 3 modes to choose. ●Continuous Access Mode (default) – the PC Card Adapter is constantly operating with full power and it consumes the most power. ●Maximum …

39, in den Computer eingesteckt und er Teil des Netzwerks wird, erhält er automatisch eine IP-Adresse. DSSS: Direct Sequence Spread Spectrum. DSSS erzeugt für jedes zu übertragende Bit ein redundantes Bitmuster. Dieses Bitmuster heißt „Chip“ oder „Chipping Code.“ Je länger die…

18, Backbone: The core infrastructure of a network, which transports information from one central location to another where the information is unloaded into a local system. Bandwidth: The transmission capacity of a device, which is calculated by how much data the device can transmit in a fixed…

9, 2.2.2 Driver Installation 1. Please select the second option and click “Next”. 2. Please click “Continue Anyway” …

12, X-Micro XWL-11GPAG with the Access Point when operating under Infrastructure mode. Signal Strength: Shows the wireless signal strength of the connection between the 54Mbps wireless network PC Card Adapter with the Access Point. Data Rate: Shows the statistics of data transfer, and the calculation is based on th…

6, on Windows XP. For other windows operating system, all the procedures are the same but the screens are not the exactly same. 2. Turn on the computer. Insert the CD into the CD-ROM Drive. Please select “PC Card/ PCI Card” and then click the “Install”. …