Xante CL30 Operation & User’s Manual

132, Xante CL30 Chapter 7 - Mac OS 10.1.5 Operation • 123 Features 1 The tab’s features are explained below. Quality A straightforward selection of the print quality desired. • Fast: 600 x 600 dpi • Fine: 1200 x 1200 dpi 1. Select your desired print quality. Collate Collating can be carr…

115, Chapter 5 - Mac OS 8.6-9.2.2 Operation • 106 4. The document then can be printed or deleted using the procedures given below. Printing copies 1. Press the MENU button to access the PRINT JOBS MENU and press the SELECT button. 2. Enter the personal ID number you selected above using…

178, Chapter 10 - Maintenance • 170 2. Move the two locking levers (1) to the rear of the machine to release the fuser unit; then use the handle to remove the fuser from the printer. 3. Remove the new fuser unit from its packaging and lift off the shipping tape (1) holding the levers at …

213, Chapter 12 - Accessories • 205 DUPLEX UNIT Installation 1. Switch off the printer and disconnect the power cable. 2. Remove the paper tray (1): slide it out until it reaches its stop, then lift up to remove the tray completely from the printer. 3. Remove the front cover (2) by lifting it at b…

155, Chapter 8 - Mac OS 8.6-9.2.2 Utilities • 146 Display Font List 1. To identify the fonts already loaded into the printer, select Display Font List from the Utilities menu. 2. Press Close to return to the main screen. Initialise Disk This utility will erase the hard disk of the printe…

25, Chapter 3 - Setting Up • 16 TONER CARTRIDGE INSTALLATION 1. For each color toner cartridge: a. Remove the cartridge from its package. b. Shake the toner cartridge back and forth several times; then holding it horizontally, remove the tape, and then remove the plastic clip from behind the colo…