US Robotics USR2450 Reference Manual

2, 1 Step 1. Connect the Wireless Access Point • Use the Ethernet port and an RJ-45 cable to connect the Wireless Access Point to one of the following devices: a cable or DSL modem with routing capabilities, a hub, a bridge, an existing Ethernet LAN, or a router. • Attach the antenn…

8, US Robotics USR2450 1312 To obtain the most current support information, including procedures to obtain Service Repair Orders, visit the U.S. Robotics Web site: http://www.usr.com Regulatory Approvals Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is s…

4, 54 Wireless Activity LED will blink. If you press the Reset button a second time, all setting information except for the password and the encryption data will be cleared. If this is done, the Wireless Link Indicator will blink. Step 4. Configuration of the Wireless Access Point After the Wir…

5, 7 Access Point Web Configurator To access the Access Point Web Configurator, double-click the name of the correct Wireless Access Point in the list. The utility automatically links to the Login Page of the Access Point Web Configurator using your Windows default browser. The default password is…

9, 1514 In The United States: USR-Walnut 528 Spanish Ln. Walnut, CA 91789 U.S. Robotics shall not be responsible for any software, firmware, information, or memory data of Customer contained in, stored on, or integrated with any products returned to U.S. Robotics for repair, whether under warra…