XiNCOM X16-R Operation & User’s Manual

24, Page 20 Fixed IP Address By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address, make the following changes to your configuration. • Set your Default Gateway to the IP Address of the MULTI-WAN GATEWAY. • Ensure your DNS …

39, Page 35 to allow users to connect to your Virtual Servers using a URL, instead of an IP Address. e.g. http://my_domain_name.dyndns.org ftp://my_domain_name.dyndns.org This screen allows you to define your own Server types. Figure 4-5: Virtual Server Settings – …

44, Page 40 Settings – Dynamic DNS Dynamic DNS Service This pull-down menu can Enable/Disable the Dynamic DNS feature and select the required service provider. • Disable – Dynamic DNS is not used. • TZO – Select this to use the TZO service (www.tzo.com). You must configure t…

72, XiNCOM X16-R Page 68 WAN Status Use the WAN Status link on the main menu to view this screen. Figure 8-3: WAN Status Data – WAN Status NAT Statistics This section displays data for each WAN port. • Status – This will display either Connected or Disconnected. • Default Loading Share…

48, Page 44 Non-Translation Port Range If some packets whose port number cannot be translated for special applications, you must set state to “Enable” and input value in port range. Alternatively, if its port cannot be translated in the specified time period, you must set Enable and…

29, Page 25 Advanced PPPoE The Advanced PPPoE screen is required in order to use multiple PPPoE sessions on the same WAN port. It can also be used to manually connect or disconnect a PPPoE session. Figure 3-3: Advanced PPPoE Settings – Advanced PPPoE Select WAN Port & S…