XiNCOM XC-DPG602 Operation & User’s Manual

7, XiNCOM XC-DPG602 Front Panel: Operation of the Front Panel LEDs is as follows: System: Power OFF - No Power. ON - Normal Operation Status OFF - Normal Operation ON - Firmware not loaded or Hardware Error Blinking - Data in/out WAN: LINK/ACT ON - Physical connection to the Broadband modem on WAN port 1/2 established…

10, Configuring the XC-DPG602 for your LAN a 1. 2. 3. 4. 5. 6. 7. 8. 9. Procedure Use a standard LAN cable to connect your PC to any LAN port on the XC-DPG602. Connect the power adapter and power up the XC-DPG602. Only use the power adapter provided with the product; using a different o…

19, Advanced PPPoE Figure 8. Advanced PPPoE Settings - Advanced PPPoE WAN Port PPPoE Session Select the desired Port and Session, then click the “Select” button. The data for the selected Port/Session will then be displayed in the WAN IP Account section. WAN IP Account • User Nam…

27, Multi DMZ & UPnP Dynamic DNS This feature allows each WAN port IP address to be associated with one (1) computer on your LAN. All outgoing traffic from that PC will be associated with that WAN port IP address. Any traffic sent to that IP address will be forwarded to the spe…

11, Ensure these settings are suitable for your LAN: • The default settings are suitable for many situations. • See the following table for details of each setting. Figure 3. LAN & DHCP Configuring the XC-DPG602 for your LAN 11 …

35, How it works 35 DNS Request Information Request WAN Port Monitoring Module WAN 1 WAN 2 Authoritative Domain Name Server Module Load Balancing Algorithm 1 6 7 3 8 2 5 4 9 Web or FTP Server 10 XC-DPG602 & 603 as an Authoritative DNS: Note: This example uses WAN 1 as the initial recipie…