XiNCOM XC-DPG603 Operation & User’s Manual

55, AppendicesAppendices 55 Checking TCP/IP Settings - Windows XP: 1. Select Control Panel - Network Connection. 2. Right click the Local Area Connection and choose Properties. You should see a screen like the following: Figure G. Network Configuration (Windows XP) 3. Select the TCP/IP protoco…

29, XiNCOM XC-DPG603 Advanced Features (continued) Using Remote Web-based Setup To connect to the XC-DPG603 from a remote PC via the Internet: 1. Ensure that both your PC and the XC-DPG603 are connected to the Internet. 2. Start your Web Browser. 3. In the Address bar enter: HTTP:// (Internet IP Address of the …

17, Port Options Figure 6. Port Options Connection Validation PPPoE / PPtP Connection Options Transparent Bridge Mode Health Check Use this field to select the type of connection validation to perform. When set to ICMP, the XC-DPG603 sends out ICMP echo requests. When set to HTTP, the XC-…

24, Custom Virtual Servers Settings - Custom Virtual Servers Select Custom Server Name Server List If creating a new entry, ignore this list. To edit an existing entry, select it, and then click the “Select” button. The screen will update with data for the selected entry. Custom Server…

23, Virtual Servers Figure 10. Virtual Servers Virtual Servers This feature allows you to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because: Your Server’s IP address is only valid on your LAN, not on the Interne…

8, Physical Details LAN Ports WAN1WAN2 ResetDC 5V Front Panel Status and Error conditions LED Action Condition WAN1 LINK/ACT & 10M/100M LEDs flash alternatively. Firmware Download in progress. WAN1 LINK/ACT & 10M/100M LEDs flash concurrently. MAC address not assigned. WAN1 LINK/ACT &a…