DigiDesign Command 8 Manual 

25, Chapter 3: Command|8 Overview 19 LCD Display The LCD is a large, two-row display that shows up to six characters per fader strip. The LCD displays track, insert, send, and other parameters depending on the current view, as se- lected by the Channel/Console switches. Views in Pro Tools Mode When …

62, Command|8 Guide56 Fader Utilities Fader Calibration Use this routine to return the motorized, touch- sensitive faders to their factory calibration set- ting. To reset the faders: 1 Press the F1 Utility switch to enter Utility mode. 2 Press the Channel Select switch that corre- spon…

68, DIGIDESIGN 2001 Junipero Serra Boulevard Daly City, CA 94014-3886 USA Tel: 650.731.6300 Fax: 650.731.6399 TECHNICAL SUPPORT (USA) Tel: 650.731.6100 Fax: 650.731.6375 PRODUCT INFORMATION (USA) Tel: 800.333.2137 INTERNATIONAL OFFICES Visit the Digidesign website for contact information www.digides…

55, Chapter 5: Using Stand-Alone Mode 49 3 Press F2/MIDI Edit. The F2 switch LED flashes, and the LCD display shows parameters similar to the following tables (which show default as- signments for Fader 1 as an example): • The currently selected control (usually Fader1 or the la…

52, Command|8 Guide46 3 Programming Command|8 faders, encoders, and switches for the device you are controlling, if necessary, with custom naming options (see “Editing MIDI Maps” on page 48. 4 Naming, saving, and recalling presets (see “Presets to Save and Recall Maps” on pag…

54, DigiDesign Command 8 Command|8 Guide48 Switches In Stand-Alone mode, 32 of the Com- mand|8 switches are available in both pages of each preset. The channel Mute and Solo switches are premapped to CC 14 (mute) and CC 15 (solo); Channel Select switches are not premapped. The Channel View selectors (EQ, D…