Xyron PRO 1250 Operation & User’s Manual

8, Top and bottom Cartridge is not Reinstall the cartridge making certain laminating films are squarely seated. cartridge is seated. Make certain not aligned. output tray is completely pushed forward and down. Cut blade does not cut Adhesive build-up on Using caution, apply adhesive …

3, Remove the Xyron Pro1250 and crank handle from the packaging. Install the crank handle by carefully threading it clockwise into the threaded opening in the side plate until snug. Setting Up Cartridge Replacement Input Tray Output Tray Slide input tray out away from machine. With bot…

4, Xyron PRO 1250 Cartridge Replacement Grasp the film and pull the film forward 2 to 4 inches (4 to 6 cm). 3 Place the film under the metal bar with the orange blade holder and under the top black roller. Using both hands as shown, slide the output tray towards machine completely. Push down to ensure the …

5, Cartridge Replacement If You Have Additional Questions, Contact the Xyron Technical Hotline: 800-793-3523 in the U.S.A. and +45-7594-5866 in Europe E-mail address in the U.S.A.: [email protected] E-mail address in Europe: [email protected] Also, check out our website at www.xyron.com Turn the handle…

7, Feet (m) Product No. Description Per Roll DL1201-150 Two-Sided Lamination – General Use 150' (45.8 m) SL1201-150 Single-Sided Lamination – General Use 150' (45.8 m) LAT1201-100 One Side Laminate / One Side Adhesive Application – High Tack 100' (30.5 m) LAT1206-100 One Side Lam…