Digital Equipment Corporation DEClaser 5100 Operation & User’s Manual

193, B.1.2 Space Requirements Install the DEClaser 5100 printer in an area that meets the following requirements: • A flat, level surface free from vibrations • Enough surrounding space to allow ventilation and easy access to the printer to perform daily operations (Figure B–1) Figure …

93, 5.5.2 Using the Optional Hard Disk The optional DEClaser 5100 hard disk drive allows you to download PostScript fonts into non-volatile storage. Fonts downloaded to the hard disk drive are not deleted when you turn the power off, making this method a flexible and non-volatile…

22, Figure 1–2 identifies the main parts inside the printer (top cover shown open). Figure 1–2 Inside the Printer 2 DSG-000426 3 1 1–6 Introducing the DEClaser 5100 Printer …

183, Table A–11 (Cont.) Communications Sub-menu Features Feature Description SER: Flow control 2 Specifies which flow control mechanism is used on the serial port. When 1-way XOFF is selected, the printer sends XON /XOFF and treats all received serial information as data for flow control. Whe…

229, Digital Equipment Corporation DEClaser 5100 8. Lift and tilt the SIMM upwards until it is firmly seated and locked in the slot. DSG-000565 9. Reverse steps 4, 3, 2, and 1. Options E–21 …

157, Table 10–5 (Cont.) Common Operating Problems Problem Possible Cause Corrective Action No Printout Printing does not start. The printer is in the paused state. (The message display shows PAUSED or the Online indicator is not on.) Press On Line to return the printer online. The…