Digital Projection M-Vision 1080p-260 series Operation & User’s Manual

29, Rev A May 2010 Page 2.11 Digital Projection M-Vision 1080p-260 User Manual 2. Installation Mounting the projector The four adjustable feet under the chassis allow the projector to be lowered onto a at surface without any danger of hands being trapped between the bottom frame and …

37, Digital Projection M-Vision 1080p-260 series Rev A May 2010 Page 3.3 Digital Projection M-Vision 1080p-260 User Manual 3. Getting Started Selecting an input signal or test pattern Input Connect an video source to the projector. The signal should be automatically detected by the projector, and should be displayed within a …

15, Rev A May 2010 Page 1.1 1. Introduction Contents What’s in the box? .............................................................................................................................. 1.2 Key features of the projector ...........................................................…

72, Page 6.4 Rev A May 2010 6. Appendix Digital Projection M-Vision 1080p-260 User Manual Error codes If the projector detects an error, the red Issue indicator will ash, as shown in the chart below. For example, if the lamp door is left open, the red indicator will ash twice followed by…

76, Page 6.8 Rev A May 2010 6. Appendix Digital Projection M-Vision 1080p-260 User Manual Video formats supported Signal Type Resolution Frame Rate HDMI RGB Component 1: RGB Component 1: Y/Pr/Pb Y/Cr/Cb Component 2: Y/Pr/Pb Y/Cr Video S-Video Reference PC 640x480 59.94 x x x VESA DMT 64…

20, Page 2.2 Rev A May 2010 2. Installation Digital Projection M-Vision 1080p-260 User Manual Screen requirements Aspect ratio Fitting the image to the DMD The projector uses a DMD (Digital Mirror Device) to create the image that is projected onto the screen. The resolution of the DMD in …