Dixon 12881-106 Safety Instructions & Operator's Manual

38, CARE AND MAINTENANCE 38 CAUTION HOT oil may cause burns. Allow engine to cool before draining oil. Hex Head Valve Stem CHANGING THE ENGINE OIL: 1. The “Dapco” oil drain valve is located on either side of the engine crankcase (depending on the type of engine installed on your ZTR®…

33, CARE AND MAINTENANCE 33 WARNING Failure to observe the following instructions may result in personal injury. Before performing any maintenance, turn off engine, allow to cool & remove key. Use extreme care when working on machinery. Do not wear watch or jewelry. Do not wear loose fitting …

20, CONTROLS 20 MOWER BLADE SWITCH: To engage blades: pull up on switch To disengage blades : push down IGNITION SWITCH: •Turn to start position to crank engine. Release when it starts. •For headlights - rotate switch one notch counter-clockwise from run. Note: Remove key when mower is not in…

28, Dixon 12881-106 OPERATION INSTRUCTIONS 28 MOWING WITH A MULCHING ATTACHMENT: Mulching or recycling the grass clippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it is not possible to hide all the r…

24, OPERATION INSTRUCTIONS 24 STARTING INSTRUCTIONS: 1. Operator must be seated in normal operating position. 2. Set parking brake. 3. Move control levers to outboard position. 4. Assure blade clutch is off. 5. Push throttle control lever to 1/2 setting. 6. Push choke control lever forward. …

55, OWNER’S INFORMATION Date of Purchase Mower Model Number Mower Serial Number Purchased From Name Address DATE OIL CHANGED DATE ENGINE TUNED Dixon Industries, Inc.~P.O. Box 1569~Coffeyville, Ks~620-251-2000~Fax 620-251-4117 …