Dixon ZTR 5000 Series Operator's Manual

35, CARE AND MAINTENANCE NEUTRAL ADJUSTMENT: 1. Engage parking brake, and raise rear of frame with jack or blocks so that rear tires do not contact the ground. 2. Swing out the control levers, start the engine, and release the parking brake. 3. Raise the upper body to access hydro cont…

12, SEAT ADJUSTMENT INSTRUCTIONS Model ZTR 5022: 1. Set parking brake. 2. Raise upper body. 3. Loosen two front seat adjustment knobs and slide seat forward or backward tc desired position. 4. Re-tighten front seat adjustment knobs. DO NOT operate mower without seat adjustments pro…

6, Dixon ZTR 5000 Series SAFETY This cutting mower is capable of amputating hands and feet, and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. GENERAL OPERATION: • Read, understand, and follow all instructions in the manual and on…

15, CONTROLS TO GO FORWARD: From neutral position, gently push both drive levers forward. To increase speed, move levers farther forward. TO GO BACKWARD: From neutral position, gently pull both drive levers toward you. TURNING: Turning is controlled by moving one drive lever slightly …

18, OPERATION INSTRUCTIONS PARKING BRAKE SWITCH TEST: With parking brake in the OFF position, engine should not turn over or attempt to start when the key switch is moved to the start position. BLADE DRIVE SWITCH TEST: (5000 Series) a. With electric blade drive switch turne…