DOD Bass30 Owner's Manual

38, DOD and Bass30 are trade marks of the Harman Music Group Inc. Copyright Harman Music Group Printed in the USA 10/99 Manufactured in the USA Bass30 Owners Manual 18-6329-A Please visit DOD on the World Wide Web at: http://www.dod.com DOD Electronics Corporation 8760 S. Sandy Parkway Sandy, Utah …

29, Level - The Level will adjust the overall strength of effects in the Preset. The Level ranges from 0 to 99. Bi-Amp - Bi-Amping is a term used to describe the process of using a two way crossover to add definition to your signal by separating the high frequencies from the low frequencies, an…

9, Rear Panel A. Input Jack - Connect your instrument to this jack. B. Jam-A-longª - This is used for playing along with your tapes and CD’s. Use a stereo cable with 1/8'' stereo plugs to connect the headphone output of your tape or CD player to this jack. C. Headphone - …

10, Getting Started The Bass30 is ready for you to plug in and play. It already has a variety of sounds programmed into both the 30 factory and 30 user Presets. You will find that the User Presets are exact duplicates of the Factory Presets. The Factory Presets are permanently written in…

4, Table of Contents Safety Information................ I Declaration of Conformity.... II Table of Contents................. III Introduction Congratulations................... 1 Included Items................... 1 Features.............................. 1 Section One A Guided Tour.................…

22, DOD Bass30 SECTION FOUR - Effects Definitions Compressor/Limiter - A compressor is used to constrain the dynamics of an instrument. In other words, it sets a boundary for the volume the instrument will be able to reach. Compressing the dynamics of an instrument tends to provide a smooth, balanced output…