Toa N-8011MS Installation Manual

Installation Manual for Toa N-8011MS Adapter, Intercom System (1 pages)

Specifications:

241/241969-n8011ms.pdf file (08 Jan 2024)
  • Manufacturer: Toa
  • Category of Device: Adapter, Intercom System
  • Document: N-8011MS, File Type: PDF Installation Manual
  • Updated: 08-01-2024
  • Count of Pages: 1
Download N-8011MS Manual (1 pages)

Read PDF Document Online:

Data: UPD 8th January 2024

Toa N-8011MS Adapter, Intercom System PDF Installation Manual (Updated: Monday 8th of January 2024 07:25:34 PM)

Rating: 4.5 (rated by 36 users)

Compatible devices: N-8500MS, IC-100, VS-900MS, C-CV454R-3 CU, N-8020MS, N-8000MS, VS-900AL, WM-4210.

Recommended Documentation:

Text Version of Toa N-8011MS Adapter, Intercom System Manual (Summary of Contents)

(Ocr-Read of Document's Main Page, UPD: 08 January 2024)


3. WIRING
3.1. Connection Diagram
3.2. The Type of Cables
The types of cables are to be determined according to the
following conditions.
• Twisted pair wires (such as those used for electronic push-
button telephone) are to be used for wiring between the
Exchange and the stations in principle.
• The number of cables pairs laid should be determined
considering the possibility of future expansion of the
system.
• Outdoor wires should be used where wiring passes through
inaccessible areas such as ceilings or under floors where
the maintenance is not performed. Indoor wires may also be
used, however, in case where there is no risk of
deterioration due to exposure to heat, etc.
Note
Specifications related to each junction are as follows.
Mini-clamp connector (N-8000EX line terminal)
Conductor diameter: ø  0.4 – 0.65 mm (AWG22 – 26),
Solid wire
Outside diameter: ø 1.05 mm or below
Clip terminal (E-7000TB)
Conductor diameter: ø 0.4 – 0.8 mm (AWG20 – 26), Solid
wire
Outside diameter: ø 1.5 mm or below
3.3. Relations Between Core Diameter of Cable and
Maximum Cable Length
Referring to the following chart as guidelines, design the
distance between the Exchange and stations so that loop
resistance value becomes 170 Ω or less.
3.4. Mini-Clamp Connector Connection
Mini-clamp connectors for line terminals are supplied with the
N-8000EX Exchange.
Connect the mini-clamp connector to a cable using a
commercially available tool (pliers).
Step 1. Cut off two-cable ends in equal length, and insert
them securely to a cover section (transparent side)
of the mini-clamp connector.
Note
Insert the cable without stripping the cable jacket.
Step 2. With a pair of pliers, lightly pinch the mini-clamp
cover and, after ensuring that the cable is securely
inserted, firmly squeeze on the cover.
Note
Squeeze on the mini-clamp cover until it is correctly
locked.
Step 3. Insert the wired connector (plug) into the exchange's
connector (socket) until it locks into place. 
Printed in Japan
133-06-260-5B
1. WALL MOUNTING
The station can be mounted on a wall using an optional 
YC-290 wall mounting bracket.
The YC-290 can be installed to JIS standard one gang switch
box.
1.1. Mounting Example
Step 1. Install the YC-290 Wall mounting bracket to the wall.
Notes
• Use appropriate screws for the construction of wall.
• Wooden screws 3.5 x 20 are supplied with the 
YC-290.
• No fitting screws for switch box are supplied.
Step 2. Hang the station on the Wall mounting bracket hook
to install.
Push down the station main body in the direction
indicated by the arrow.
2. DESK-TOP INSTALLATION
In desktop installations, the front operation panel can be
inclined 16˚ from the desk surface for easier operation by
attaching the YC-290 Wall Mounting Bracket to its bottom
surface. 
2.1. Mounting Example
Hang the Wall mounting bracket hook on the station's wall
bracket mounting slot to install.
Push up the Wall mounting bracket in the direction indicated
by the arrow.
This Master Station is designed to connect to the IP Intercom Exchange, and provides hands-free conversation of high sound
quality. With its space-saving design, this Master Station features the same functions as the Standard Master Station.
Using an optional YC-290 Wall Mounting Bracket, this station can be mounted on a wall, or tilted for easy key operation when
used on a desktop.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
N-8011MS
STANDARD HANDS-FREE MASTER STATION
INSTALLATION MANUAL

1
2
YC-290 Wall mounting bracket
Station
Wooden screw 3.5 x 20 
(supplied with the YC-290)
Hook
Wall 
surface
2-ø4.5
4.6 x 6
83.5
23.5
131.5
60
5037
50
34
64
4.5 x 10
[YC-290 Dimensional drawing]
Unit: mm
Rubber foot mounting position  
(desk-top application)
92
72.1
60.7
195
YC-290
[Installation completion drawing]
YC-290
Unit: mm
YC-290 Wall 
mounting bracket
Hook
Rubber foot 
(supplied with 
the YC-290)
Station
16°
90
[Installation completion drawing]
192.3
YC-290
Unit: mm
Both upper and lower 
terminals (clip terminals) 
are internally connected. 
E-7000TB 
Terminal board
Station
Connection cable
(accessory)
RJ-11 modular rosette 
(commercially available)
Mini-clamp connector 
(Supplied with the N-8000EX)
To N-8000EX Exchange 
16 lines
Cover (transparent side)
Cable
N-8000EX Rear panel
To connect the cables from the N-8000EX
Exchange to the Master Station, use the supplied
connection cable and a commercially available RJ-
11 modular jack. These cables have no polarity.
Conductor 
diameter 
(mm)
ø
0.4
ø
0.5
ø
0.65
ø
0.9
Maximum cable length between the
Exchange and station
(Assuming that the loop resistance is 170 Ω.)
570 m
900 m
1.5 km
2.9 km
Loop 
resistance 
(Ω/km)
295
187
113
58





DOC-64dc4bc9:

Recommended:
IC-M604A, F1915LVD, OEM-290-265, Lifebook NH751

348, IP ART 7/G+/48, inQuire 1000, CIOT-700ML, BT Next
  • A Don't place the unit where its exposed to rain, high temperatures, high humidity, dust, salt spray, or other severe environments. A Don't press on the LCD display. If broken, use caution not to scratch yourself. A Don't press on the Camera Lens or Detector Lens on the O ...

    Model & Doc Type: DV01P 2

  • MANUALE ISTRUZIONE CARATTERISTICHE DI FUNZIONAMENTO E INSTALLAZIONE INSTRUCTIONS MANUAL OPERATION FEATURES AND INSTALLATION NOTICE CARACTERISTIQUES DE FONCTIONNEMENT ET INSTALLATION cod. N.I. 012 175565.10BITRON VIDEO s.r.l. Via Torino 21/B - 10044 PIANEZZA (Torino) Italy Tel. +39 011 9 ...

    Model & Doc Type: AN 9839 7

  • Copyright © 2019 by Studio Technologies, Inc., all rights reservedwww.studio-tech.comUser GuideIssue Preliminary 2, November 2019This User Guide is applicable for serial numbers M348-00151 and later with main firmware version 1.05 and later and STcontroller application version 2.05.00 ...

    Model & Doc Type: 348 31

  • - INSTRUCTIONS -The LAF-C Console Master system is a loudspeaker type, single talkpath open voice system. Multiple masterscan be used, along with a large variety of sub station models to create a communication system tailored to theuser's needs. Master stations are available in 20-and 4 ...

    Model & Doc Type: LAF-20C 8

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 Comelit
HFX-7004M
104 08/02
2 CDVI
CDV91F
12 08/11
3 Comelit
iPower kit
16 27/10
4 Aiphone
AP-10AS/C
2 0.03 Mb 05/02
5 Aiphone
VY-10EM
16 0.73 Mb 22/09
6 V-Tec
DJ4A
4 17/09
7 Marmitek
DOORPHONE 170
140 26/09
8 PTI
ARV 2000
15 17/03
9 Aiphone
LEF-10C
2 0.1 Mb 18/11
10 BAS-IP
AV-07T
57 18/02

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 UNIBLUE
POWERSUITE 2010 - V1
13 0.99 Mb 16.01.2024
2 Hotpoint
ARG60W Instructions for and use
32 0.64 Mb 23.02.2024
3 Mitsubishi Electric
XD90U
2 24.03.2024
4 Sony
KF-42WE610K
154 09.01.2024
5 Wilfa
Krollfritt
52 01.01.2024
6 Cino
VERSAJET International Edition, Rev. 2.2 Beta Release
235 1.95 Mb 19.11.2023
7 Trigon Electronics
Miniguard HF-2 Series
12 18.01.2024
8 LG
HB954TB
48 15.11.2023
9 Sony
Walkman D-NS313F
2 30.12.2023
10 SMC Networks
EX600-SPN1
2 03.03.2024
Operating Impressions, Questions and Answers: