Duerkopp Adler 171 Instruction Manual

17, Dismounting the protective devices – Remove the handwheel 2. – Remove the cover of the belt protection at the sewing drive. Fitting the V-belt on and mounting the protective devices – Guide the V-belt 3 through the belt protection 1 and place it on the belt pulley 6 of the machin…

15, 5.2 Earthing (direct drive) The earthing wire on the sewing machine head bleeds off static charges of the machine head via the motor control unit to the mass. – Fasten the earthing wire 3 to the provided connection at the control. – Guide the earthing wire 3 upwards and fasten it wit…

13, 4.5 Mounting the control for machines with direct drive – Mount control 1 with 4 screws under the table top 8. – Fasten the pow er supply cable of the control with the strain relief clamp under the table top. 4.6 Mounting the set value initiator – Screw angle 7 under the table top 8. – Sc…

5, Duerkopp Adler 171 Index Page: Part 2: Installation instructions class 171  173 1. Scope of delivery .............................................. 3 2. General notes and securing devices .................................. 3 3. Assembling the stand 3.1 Assembling the stand components .....................…