ZALMAN FS-V7 Operation & User’s Manual

8, 6.5) Install the FHS Assembly Align the FHS Assembly’s base on the center of the VGA Chipset. Screw each Bolt ‘A’ on each Nipple ‘A’ slightly, and tighten each Bolt ‘A’ a few turns at a time, alternating between each bolt, until the Clip is completely attached to each Nipp…

7, 1) Brace Plate 2) Screwdriver 3) Bolt 'B' 4) Nipple ‘B’ 6.2) Install the Brace Plate Use each Bolt 'B' to attach the Brace Plate to each Nipple ‘B’ as shown in the diagram. 6.3) Attach the VGA RAM Heatsinks Remove the Film from the Thermal Tapes on the bottom of th…

2, ZALMAN FS-V7 FATAL1TY STORY Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually played competitive billiards in professional tournaments and won four or five games off guys who played at the highest level. I actually thought of making a career of it, b…

5, 4. Components ① FHS Assembly(Flower Heatsink & Fan) ② Eight (8) RAM Heatsinks ③ One (1) Brace Plate ④ Two (2) Nipple ‘A’ ⑤ Two (2) Nipple ‘B’ ⑥ Four (4) Bolt 'A' (Ø3 x 5mm) ⑦ Four (4) Bolt 'B' (Ø4 x 4mm) ⑧ Six (6) Rubber Rings ⑨ Thermal Grease �…

4, User’s Manual (English Version) 1. Important Notices 1.1) Please read this manual thoroughly before installation. 1.2) After installing this product on a VGA(Video Graphics Array) card, a PCI slot adjacent to the AGP (or PCIe) slot will become unusable. 1.3) Before installing on a ne…