Dwin 3 Operating Instructions Manual

3, - 3 of 23 Safety Instructions WARNING HAZARDOUS VOLTAGE DO NOT OPEN ATTENTION COURANT ELECTRIQUE NE PAS OUYRIR CAN SHOCK, BURN OR CAUSE SEVERE INJURY OR DEATH. DO NOT REMOVE THE TOP COVER. REFER SERVICING TO QUALIFIED PERSONNEL. ! . 1. Read and apply all of the safe…

5, - 5 of 23 Introduction TransVision ™ 3 is a High Definition Digital Video Projection system comprised of two complementary components, a DLP ™ Projector featuring Mustang/HD2 technology from Texas Instruments and a Digital Video Processor. The TransVision ™ 3 o…

6, - 6 of 23 Programming SL-8000 Remote Control to Operate the TransVision ™ 3 The TransVision ™ 3 is shipped with a factory pre-programmed remote control.  To program the SL-8000 for TransVision ™ 3: 1. Press the TV and the MUTE buttons simultaneously. …

7, Dwin 3 - 7 of 23 2. DVI-D INPUTS The DVI 1 and DVI 2 inputs are provided for HD (480p, 580p, 720p, 1080i) sources and computer graphics with VGA, SVGA, XGA, and SXGA resolution. For computer graphics with VGA, SVGA, XGA, or SXGA it is recommended to set the computer to 60 Hz vertic…

1, TransVision ™ 3 TransVision3 Operating Instructions Read these instructions completely before operating this unit. Contents subject to change without notice or obligation. TransVision ™ 3.4 …

14, - 14 of 23 Image Setup The Image Setup menu allows you to position and adjust the video image size. Video image parameters vary from different video sources and must be adjusted to properly fit the screen. To Adjust the Video Image Size and Position:  Sele…