Dyson water filter Owner's Manual

9, Emptying the clear bin TM To ensure your machine continues to clean effectively, the clear bin must be emptied when the dust reaches the MAX mark. Press the cyclone release catch with your thumb to remove the clear bin assembly from the machine. Clear bin emptying option 1 Recommended for …

8, Using the tools Hose mode Press the wand release button and remove the wand. Fit one of the tools directly on to the end of the hose. Use tools for confined spaces such as car cleaning. FOR YOUR SAFETY • When the hose is fully extended, grasp firmly by the hose, not the tool. Rever…

10, Dyson water filter Emptying the clear bin TM Shroud cleaning (when necessary) To remove any build-up of lint or large dust particles on the shroud: Ensure the clear bin is empty and the clear bin base is open. A Press the bin release catch to remove the clear bin. B Clean the shroud with a cloth or dry brush to rem…

5, Using your DCO7 Switching on/off 1 Make sure you have read and understood all safety instructions before using the machine for the first time. The wand cap should be closed when not using the tools. 2 Plug into electrical outlet and press the on/off switch. 3 To start vacuuming, push…

3, Assembling your DCO7 Assembling your DCO7 This machine was inspected and packaged carefully before being shipped from the factory. If you need assistance during assembly or operation, please call the Dyson Helpline on 1 - 866 - 693 - 9766. 1 Slide the hose into the guides at the back of the ma…