ECS P5TX-Apro Operation & User’s Manual

30, P5TX–Apro User’s Manual 3: Reconfiguring Your Mainboard – 3.6 Adding System Memory There are some requirements you must follow if you want to install system memory. The memory subsystem has three 168- pin DIMM sockets which function independently. This main- board supports both…

71, P5TX–Apro User’s Manual 4: Reference Information – 4.27 Power Management Setup To enter this section of the Setup program, highlight this menu item in the main menu and press the Enter key. The following screen will appear. Menu Commands The menu commands for this screen are the same as fo…

88, P5TX–Apro User’s Manual 4: Reference Information – 4.44 Password Setting To use this command, highlight it in the main menu and press Enter. A message will appear prompting you to enter a password. Type in a password. The password is case sensitive, and can be up to 8 alphanumeric character…

42, P5TX–Apro User’s Manual 3: Reconfiguring Your Mainboard – 3.18 Installing IDE Devices The mainboard’s Enhanced IDE controller supports four de- vices in two channels, IDE1 and IDE2. These are called the Pri- mary and Secondary IDE channels. Each channel supports two devices, the first de…

54, P5TX–Apro User’s Manual 4: Reference Information – 4.10 6x86 – P166+ GP 133MHz Internal Clock Speed (Core Frequency) 100, 110, 120, 133, 150 CPU Model 6x86 6x86L P–Rating: 90+, 120+, 133+, 150+, 166+, 200+ Core Voltage Range Midpoint 3.3V 3.52V 2.5V 2.7V VCC Specification Full-spec = 3…