Edelbrock Axle-Back Exhaust Systems 5773 Manual, Installation Instructions

©2008 Edelbrock Corporation
Catalog #5773
Brochure #63-5773
Rev. 1/08- AJ/mc
EDELBROCK AXLE-BACK EXHAUST SYSTEMS
For 2007 Jeep Wrangler 3.8L V6
Catalog #5773
INSTALLATION INSTRUCTIONS

®

Please study these instructions carefully before installing your new Axle-Back Exhaust System. If you have any questions,
please contact our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at [email protected]
.
Edelbrock Corporation, 2700 California Street, Torrance, CA 90503
Toll-Free Tech Line: 1-800-416-8628
Tech E-Mail: [email protected]
DISASSEMBLY
1. Raise rear of vehicle on flat stable surface and
support using jackstands.
2. Use penetrating oil on OE clamp that hold muffler
to overaxle pipe. Loosen clamp, remove the stock
muffler isolator brackets from frame and remove
the stock muffler from vehicle.
WARNING!!!
Exhaust gas contains carbon monoxide, a deadly
invisible gas.  Correct any leaks before driving.
Suggested tools needed for installation:
❑ 13mm & 15mm deep sockets and ratchet
❑ Floor jack & jackstands
❑ Penetrating oil
IMPORTANT NOTE:
Proper installation is the responsibility of the
installer.  Improper installation will void warranty
and may result in poor performance and engine or
vehicle damage.
ASSEMBLY
1. Install muffler inlet pipe onto OE overaxle pipe.
Install one of the supplied band clamps and snug
the clamp.
2. Install the muffler with a band clamp on the inlet
end. Rotate muffler for best ground clearance, and
only snug the clamp at this time.
NOTE: The inlet of the muffler is marked.
3. Install a band clamp on the outlet end of the
muffler, then insert the outlet pipe into the muffler
and slip hanger into factory isolator.
4. Install the tailpipe using the last remaining band
clamp.
5. Starting with the overaxle pipe, align and tighten
the axle back system for the best clearance around
chassis, suspension, and bumper.
Qty. Part # Description
❑ 1
25-3296 Inlet Pipe
❑ 1
25-3297 Outlet Pipe
❑ 1
25-5582 Tailpipe Tip
❑ 1
25-55721 Muffler
KIT CONTENT
INSTALLATION INSTRUCTIONS

• 
  Thermal Dynamics PCM-102

  Thermal Dynamics Handbook: PCM-102 (#HH8B4X)

  PCM-102, 58, thermal-dynamics/pcm-102.pdf

• 
  Campbell Hausfeld CHN201

  CHN201 Nail Gun - #6D972X

  CHN201, 12, campbell-hausfeld/chn201.pdf

• 
  Makita BJR181

  Saw BJR181 Instruction, #YOT19G

  BJR181, 12, makita/bjr181.pdf

• 
  Beko DNE 61100 DPX

  Other Instruction #4963S7

  DNE 61100 DPX, 45, beko/dne-61100-dpx.pdf

• 
  Linksys WMP54GX

  Linksys User Guide Network Card WMP54GX (#CB72O8)

  WMP54GX, 59, linksys/wmp54gx.pdf

• 
  Konica Minolta magicolor 1650EN

  #29LUT8: magicolor 1650EN User Guide

  magicolor 1650EN, 48, konica-minolta/magicolor-1650en.pdf

• 
  CompuLab FIT-PC4

  CompuLab Guidance Desktop FIT-PC4 (#R719N7)

  FIT-PC4, 9, compulab/fit-pc4.pdf

• 
  Conair Thinner TH321C

  #2942IV: Thinner TH321C Reference Book

  Thinner TH321C, 4, conair/thinner-th321c.pdf

• 
  Edge10 TS701

  Monitor Tutorial #J14I42

  TS701, 16, edge10/ts701.pdf

• 
  Hitachi CG 30SC

  Hitachi User Guide: CG 30SC (#B32RM9)

  CG 30SC, 124, hitachi/cg-30sc.pdf

• Search YouTube Videos for Edelbrock Axle-Back Exhaust Systems 5773 Device
• Search Google for Edelbrock Axle-Back Exhaust Systems 5773 Information
• Search Photo of Edelbrock Axle-Back Exhaust Systems 5773 in Google Images
• Search Twitter for Edelbrock Axle-Back Exhaust Systems 5773 News