Eden Navigator WP-100 Operation Manual

9, 9 Main D.I. Outputs – These fully balanced stereo XLR outputs provide +16dBm maximum. They can be used to send a stereo signal to a mixing board or recording console, or to connect to a power amplifier. Please note, however, that the signal from these outputs is not as hot as…

14, 14 Slowly bring the Enhance control up while playing. If you turn it up close to 12:00 on the dial and still don’t have your sound, stop there. Return the Enhance to OFF or leave it at no more than 12:00 and work with the EQ section. Using the EQ Controls – Before you begin t…

2, Eden Navigator WP-100 2 Bass Guitar Pre-amplifier WP100 Navigator OPERATION MANUAL Publishing Date 02-01-2006 FOREWORD Congratulations on the purchase of your new Eden World Tour Integrated Amplifier System. All of us at Eden are totally committed to providing you with the very best bass guitar systems in the…

3, 3 Please read this manual in its entirety before operating your new amplifier. Failure to do so could result in misuse or damage. We’ve taken the time to write it, which was a lot longer than the time it will take for you to read it. Help us help you by taking a few moments to …

5, 5 Enhance Bypass Switch – disengages the Enhance control for a quick change in tone. The indicator to the left of this control will be lit when the Enhance circuit is bypassed. This switch is duplicated on the footswitch. Turbo Boost Switch – Engages the +6dB Turbo Boost for instant…

6, 6 Mode Selector Switch – Your Navigator can be operated in Stereo or Bi- amp mode. This switch allows you to choose which mode is used. Limit Switch – This switch enables the internal stereo Output Limiters to be engaged with the final Main Outputs. The Limiters are calibrated to …