Wasp WDT2200 Operation Manual

11, Wasp WDT2200 Page 11 of 41 ______________________________________________________ © 2003 Wasp Technologies, Inc. 3.2 WDT2200 Modes of Operation There are three modes of operation in the WDT2200: a. Ready Mode b. User Mode c. Supervisor Mode 3.2.1 Ready Mode T…

28, Page 28 of 41 © 2003 Wasp Technologies, Inc. Chapter 4. HARDWARE OVERVIEW 4.1 INTRODUCTION The WDT2200 is a handheld data terminal that has an integrated laser-scanning module or clip- on pen module for bar code reading. A rechargeable Li-ion battery pa…

6, Page 6 of 41 ______________________________________________________ © 2003 Wasp Technologies, Inc. Chapter 2. System Software Organization The WDT2200 system software is organized into two modules: the kernel module and the application module (see d…

19, Page 19 of 41 © 2003 Wasp Technologies, Inc. Send/No-send Leading Digit (SEND) Send/No-send Check Digit (SEND) UPC-E Enable/disable decoding (ON) Send/No-send Leading Digit (SEND) Send/No-send Check Digit (SEND) Enable/disable Zero-Expansion (OFF) EAN-…

29, Page 29 of 41 © 2003 Wasp Technologies, Inc. 4.2 FEATURES • 16-bit Microprocessor, 16Mhz Clock • Real Time Clock Integrated Circuit (IC) • 2.5MB CMOS (RAM) Memory. • 26 alphanumeric rubber keys with 1 scanner trigger switch • 128x64 pixel grap…

18, Page 18 of 41 © 2003 Wasp Technologies, Inc. 2.SERIAL The WDT2200 supports one RS232 port on a flat 12-pin connector. Data can be downloaded to and uploaded from the WDT2200 via the serial data communication port. The communication parameters must b…