Eden WT-300 Traveler Owner's Manual

7, 7 EQ Settings Setting name: _____________________ Setting name :___________________ Setting name: _______________________ …

2, 2 Congratulations on your purchase of the Eden WT-300 Traveler Bass Instrument Amplifier. You have purchased what we feel is one of the finest bass amplifiers in the world. The WT-300 produces 300 watts of pure power into 4 ohms (175 watts into 8 ohms) wi…

5, 5 your lower strings. If the action of the compressor seems premature or excessive for your taste, you can lower the gain control a bit to delay the onset of compression. Having set your initial level, you are now ready to proceed with setting up your tone controls. Since tone adjustme…

6, Eden WT-300 Traveler 6 accommodate the characteristics of your amplifier and your predominant application. If you will only be using one cabinet, a 4 Ohm model will draw the most current from your amplifier. If you will generally be using two cabinets, they should be 8 Ohm models so their co…

4, 4 compressor and enhance control and prior to the tone section. Recording Out – This fully balanced XLR output allows you to send a post-EQ/pre- master signal to a recording or sound reinforcement mixing console. This output is designed to allow use with phantom powered system…