Vantec NEXSTAR 2 355UF Operation & User’s Manual

14, Vantec NEXSTAR 2 355UF Installation: NexStar 2 External 5.25” IDE Enclosure 12 Installing the 5.25” device in the NexStar 2: 1) Remove the top cover of the NexStar 2 (the side with the logo and text). 2) Connect the IDE cable and power cable to the 5.25” device as pictured below. 3) Connect the audio cable to 5.2…

5, Specifications/Features 3 2. Specifications/Features: 2.1. NexStar 2 External 3.5” HDD Enclosure: Specifications: • Interface: IDE to USB 2.0/FireWire (NST-355UF only) • Dimension: 210 X 135 X 40 mm Features: • Dampens Hard Drive vibration • Transfer Rates Up to 12Mbps With USB 1.1 …

6, System Requirements 4 3. System Requirements: • Intel Pentium II 350MHz-compatible or Apple G3 processor and greater • Microsoft Windows 98SE/ME/2000/XP or Mac OS 8.6 and greater • USB-equipped system • For USB 2.0 speeds, the system must support USB 2.0 specifications • For FireWir…

11, Installation: NexStar 2 External 3.5” HDD Enclosure 9 Windows 98SE USB (NST-355UF – Combo Drive): 1) If this is the first time you are using the NexStar 2, unplug the NexStar 2 if you currently have it connected. If the [Add New Hardware Wizard] dialog box is open, close it. 2) Insert the d…

12, Installation: NexStar 2 External 3.5” HDD Enclosure 10 Mac OS 9.0 or later - (NST-355U2, NST-355UF): 1) No drivers are necessary when using Mac OS 9.0 or later. If the hard drive does not appear on the desktop, be sure to partition your hard drive. Mac OS 8.6 - (NST-355U2, NST-355UF): 1) Unplu…

20, Creating A New Partition 18 7. Creating A New Partition: Note: Most hard drives should come with a CD that includes its installation program. If not, a download should be available on the manufacturers website. The best way to partition a new hard drive is by using the manufacture…