Varec 8300 series Installation And Operation Manual

116, Installation Tank Gate Interface 106 Installation and Operations Manual 7.3.4 Grounding To allow use in harsh industrial environments, the Tank Gate Interface incorporates ANSI/IEEE surge protection. In solid-state control systems, grounding helps limit the effects of noise due to electr…

73, 8303 Varec, Inc. 63 5.6 Modbus I/O (MFIO) The Modbus I/O Module point is used for communicating with Allen Bradley Flex I/ O Modules. The MFIO point lets you specify what Modbus data is read from the Allen Bradley Module and it also allows data configuration. 5.6.1 Parameters Th…

144, Troubleshooting Tank Gate Interface 134 Installation and Operations Manual 9.2.2 LED Displays under Abnormal Conditions The table below lists the abnormal conditions of the four indicator lights. From this table the user should be able to pinpoint the cause and derive a solution to the probl…

120, Using ViewRTU Tank Gate Interface 110 Installation and Operations Manual New The user is able to create a new configuration file by clicking on the New push-button from the tool bar or by selecting New from the File menu. When selected, a dialog box appears displaying a list of con…

15, 8303 Hardware Varec, Inc. 5 2 Hardware The Tank Gate Interface consists of an enclosure, motherboard, single tank gauge interface module and connectors. 2.1 Hardware Block Diagram A Tank Gate Interface hardware functional block diagram is shown below. This diagram shows the rel…

21, Varec 8300 series 8303 Hardware Varec, Inc. 11 Figure 2-10: COM1 J5 Terminal Block 2.2.3.1 COM0 (J7) COM0 is an RS-232 port for use in diagnostic testing/local programming or communications to a host system. The protocol defaults to Tank Gate Interface Slave at the 9600 baud, 8 data bits, and no parity (for…