Watlow Electric ANAFAZE SYSTEM 32 Installation And Operation Manual

51, 46 Kp is the proportional gain, and FSR/Kp is referred to as the proportional band PB. The gain can be set from 0 to 255 for the SYSTEM 32. Note that when gain is specified in the control equation the output would be different for the same error if a different full scale is used…

14, Watlow Electric ANAFAZE SYSTEM 32 9 2.9 SUBASSEMBLY IDENTIFICATION A32-PIOM: PROCESSOR I/O MODULE includes factory selectable communication interface [RS-232 or current loop], 32 control outputs, 24 digital outputs, and 16 digital inputs. A32-RRAIM: REED RELAY ANALOG INPUT MODULE for 16 mixed sensor inputs including direct connec…

66, 61 10.6. Input Types The following one byte codes designate the various input types accepted by the SYSTEM 32: Code Input Type ------------ --------------- 00 Linear (0-60 mV) 01 J Thermoco…

26, 21 ANAFAZE SYSTEM 32 connections for a single unit are as follows: Black Box COMPUTER LD485A SYSTEM 32 +485 Output (Start bit +5v) TXA RX+ #3 -485 Output (Start bit 0v) TXB …

50, 45 not be confused with with the type of control output signal: for example pulsed DC voltage or analog output. 8.1.3 ON/OFF CONTROL The simplest way to control the PROCESS VARIABLE (PV), for example temperature on an oven, to a desired SETPOINT (SP), operating temperature, is to use ON/OFF contr…

38, 33 |--------| + 5vdc 31 O-------------------O + | | | Ready 33 O-------------------O - | | SSR | …