Watlow Electric Series 142 Operation & User’s Manual

7, Jim Boigenzahn Winona, Minnesota, USA Name of Authorized Representative Place of Issue General Manager December 2001 Title of Authorized Representative Date of Issue Signature of Authorized Representative Watlow Series 142 User’s Manual ■ 7 Declares that the following product: Engl…

8, 8 ■ User’s Manual Watlow Series 142 automatic power reset — A feature in latching limit controllers that does not recognize power outage as a limit condition. When power is restored, the output is re-ener- gized automatically, as long as the temperature is within limits. electrical n…

4, Watlow Electric Series 142 4 ■ User’s Manual Watlow Series 142 Figure 4 — System wiring example. ∫ WARNING: Install high or low temperature limit control protection in sys- tems where an overtemperature fault condition could present a fire hazard or other hazard. Failure to install temperature limit…

2, 2 ■ User’s Manual Watlow Series 142 Figure 2a — Series 142 dimensions. Installation Procedure 1. Drill two 5mm (0.187 in.) diameter holes in the desired panel location. 2. Mount the unit with two 6-32 screws, 6mm (0.25 in.) hex nut and #6 internal tooth lock washer. 3. Use the correct thermoc…

1, Series 142 User’s Manual Safety High Limit or On-Off Heat Controller 1241 Bundy Boulevard, P.O. Box 5580, Winona, Minnesota USA 55987-5580 Phone: +1 (507) 454-5300, Fax: +1 (507) 452-4507, Internet: http://www.watlow.com The Watlow Series 142 Safety Limit is a compact, environmental…